Carbolite HTRH 150/600 High Temperature Horizontal Tube Furnace

DETAILS

Vendor: Carbolite
Category: Laboratory Equipment
Part Number: HTRH150-600
General Info: The Carbolite Gero high temperature tube furnaces HTRH can be used horizontally up to 1800 °C. The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity. The insulation and molybdenum disilicide (MoSi2) heating elements are installed in the rectangular housing. The heating elements are vertically hanging and can be replaced easily. At higher temperatures and in the presence of oxygen, MoSi2develops an oxide (SiO2) layer, which protects the heating elements against further thermal or chemical corrosion. Three-zone tube furnaces (HTRH-3) can achieve better temperature uniformity than single-zone versions. In these models each zone is equipped with a dedicated thermocouple and controller, which is especially useful to preheat gases required for reactions inside the system. The HTRH tube furnaces do not include an integral work tube. The work tube must be selected as an additional item. The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.Application Examplesageing, annealing, brazing, calcination, catalyst research, CIM, coating, CVD, degassing, drying, hardening, MIM, miniplants, pyrolysis, sintering, soldering, sublimation, synthesis, tempering, test fuel cells, thermocouple calibrationStandard features1800 °C maximum operating temperatureProgrammable 3216P1 controller3-zone models fitted with 1 x programmable 3216P1 and 2 x 3216CC end zone controllers, with retransmission of setpointOver-temperature protectionAccepts work tubes with outer diameters up to 100 mm for use with modified atmosphereAccepts work tubes with outer diameters up to 200 mm for use in airHeated lengths of 100, 250, 300 or 600 mmLow thermal mass ceramic fibre insulationVertically hanging, high quality MoSi2 heating elementsRectangular housing with holes for convection coolingAvailable with 1 - 3 heating zonesFurnace comes with separate control box with 3 m cable, plug and socketOptions (specify these at time of order)A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communicationsA range of additional work tubes is available in a variety of materialsInsulation plugs & radiation shields are strongly recommended for high temperature vertical tube furnaces to prevent heat loss & improve uniformityModified atmosphere and vacuum assemblies are availableVacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and aboveOxygen sensor for inert gas packagesTechnical details View insideouter caseceramic fibre end insulationceramic fibre case insulationheating elementsceramic fibre inner insulation Related ProductsCarbolite 3216P1 Programmable ControllerCarbolite CC-T1 Touch Screen ControllerCarbolite 3508P1 Programmable ControllerCarbolite 3508P10 Programmable ControllerCarbolite 3508P25 Programmable Controller